2 LF909M1-QT-S-FS
Item Number: F122767Brand - Watts
Couldn't load pickup availability
- Size: 2 inch
- Weight: 48.8 lb
- Body Material: Lead Free* Cast Copper Silicon Alloy
- Maximum Working Pressure: 175 psi
- Temperature Range: 33°F - 140°F (continuous)
- Connections: 2 inch Male NPT Threaded
- Flood Sensor: SentryPlus Alert® Technology for discharge detection
- Shutoff Valves: Quarter-turn ball valves with lever handles
- Installation: Horizontal or vertical
Description
Description

Collapsible content
Additional Details
This 2 inch Watts LF909M1 Lead Free Reduced Pressure Zone Backflow Preventer Assembly provides superior cross-connection control for potable water supplies. It prevents the flow of polluted water from entering due to backsiphonage and/or backpressure in continuous pressure piping applications and at health hazard cross-connections.
Features
- Exclusive design incorporates the patented air-in/water-out principle for maximum relief valve discharge during emergency conditions.
- Includes a flood sensor with SentryPlus Alert® technology to detect excessive water discharges from the relief valve.
- Flood alerts are activated with an add-on sensor connection kit, compatible with BMS, cellular communication, or the Nexa® platform (via Wi-Fi) and BAS (via RS-485 Modbus).
- Modular, compact design eases installation and servicing.
- Features replaceable seats.
- Can be installed horizontal or vertical without special tools.
- Equipped with quarter-turn ball valve shutoffs with lever handles and a protective bronze strainer.
Operation
- The unique relief valve features two channels: one for air, one for water. When the relief valve opens, the right channel admits air to the reduced pressure zone, relieving vacuum, while the left channel drains the zone to atmosphere.
- This system uses the air-in/water-out principle to prevent potential backflow even if both check valves foul and simultaneous negative supply and positive backpressure develop.
Notice: An add-on connection kit is required to activate the flood sensor. Without the connection kit, the flood sensor is a passive component and does not communicate with any other device. Watts is not responsible for the failure of alerts due to connectivity or power issues.
Notice: The installation of a drain line is recommended, and an air gap is necessary when installing a drain line. It is required to thoroughly read all installation instructions and product safety information before beginning installation. Inquire with governing authorities for local installation requirements.
Specifications
- Product Series: LF909M1-QT-S-FS
- Assembly Type: Reduced Pressure Zone Backflow Preventer
- Nominal Size: 2 inch
- Body Material: Lead Free* cast copper silicon alloy
- Check Seats Material: 909 Celcon®
- Relief Valve Seats Material: Stainless Steel 909
- Test Cocks Material: Lead Free* cast copper silicon alloy
- Shutoff Valves: Quarter-turn ball valves with lever handles
- Strainer: Bronze
- Flood Sensor: Included with SentryPlus Alert® technology
Performance
- Maximum Working Pressure: 175 psi (12.1 bar)
- Temperature Range (Continuous): 33°F - 140°F (0.5°C ~ 60°C)
- Temperature Range (Intermittent): 180°F (82°C)
Connections
- Inlet/Outlet Connection Type: Male NPT Threaded
Certificates & Approvals
- AWWA Standard: AWWA C-511-92
- ASME Standard: ASSE 1013
- CSA Standard: CSA B64.4
- NSF Standard: Tested and Certified by NSF International, NSF/ANSI 61-G&372
- Plumbing Codes: FCCCHR of USC Manual Section 10, IAPMO (UPC), SBCCI (Standard Plumbing code)
- Approvals: Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California (for QT and S models)
FAQs
What is the primary function of the Watts LF909M1-QT-S-FS assembly?
What does 'Lead Free' mean for this product?
How does the flood sensor work with this backflow preventer?
Can this backflow preventer be installed in any orientation?
What is the maximum operating pressure and temperature for this assembly?
Related Products
-
Item Number: 0881382
Watts 909-ELF (vertical) Air Gap Elbow Fitting
Regular price $261.00Limited Stock -