8 375 RPDA, GRV BODY, GRV X GRV, LESS GATE VALVES
Item Number: 8-375ADALBrand - Wilkins
Couldn't load pickup availability
- Size: 8 inch
- End Connections: Grooved for steel pipe
- Protects against backsiphonage and back-pressure
- Features metered bypass for leak detection
- Maximum Working Water Pressure: 175 PSI
- Main Valve Body Material: Ductile Iron ASTM A536
- Epoxy Coated for durability
- ASSE® Listed 1047; CSA B64.4 Certified
Description
Description
Help Me Connect
Help Me Connect
Connections
- This 8-inch Model 375ADA features grooved end connections, specifically designed for secure attachment to steel pipe.
- Ensure compatibility with corresponding grooved fittings and couplings that meet AWWA C606 and ASME B16.42 Class 150 standards.
Installation Requirements
- Installation must comply with local codes, manufacturer's instructions, and the latest edition of the Uniform Plumbing Code.
- The assembly should be mounted a minimum of 12 inches (305mm) and a maximum of 30 inches (762mm) above adequate drains.
- Ensure sufficient side clearance for proper testing and maintenance.
- It is critical that no part of the unit is submerged during installation or operation.

Collapsible content
Additional Details
The Zurn Wilkins Model 375ADA Reduced Pressure Detector Assembly is engineered for installation on water lines in fire protection systems to safeguard against both backsiphonage and back-pressure of contaminated water into the potable water supply. This 8-inch model is supplied with grooved body connections and less gate valves.
The 375ADA incorporates a metered by-pass designed to detect leaks and prevent unauthorized water use, making it ideal for applications where a potential health hazard exists.
Application & Features
- Provides protection against backsiphonage and back-pressure.
- Ideal for fire protection systems.
- Metered by-pass for leak detection and prevention of unauthorized water use.
- All checks and the relief valve are accessible for maintenance without removing the device from the line.
Materials & Construction
- Main valve body and access covers are made from Ductile Iron ASTM A536.
- NSF Approved fusion epoxy finish coating.
- Internals, fasteners, and springs constructed from Stainless Steel, 300 Series.
- Seat ring and check valve are made from NORYL™.
- EPDM (FDA approved) elastomers for seat discs and seals.
- Sensing line features a stainless steel, braided hose.
Specifications
General
- Model: 375ADA
- Nominal Size: 8 inch
- Product Type: Reduced Pressure Detector Assembly
Performance Ratings
- Maximum Working Water Pressure: 175 PSI
- Maximum Working Water Temperature: 140°F
- Hydrostatic Test Pressure: 350 PSI
Connections
- End Connections: Grooved for steel pipe (AWWA C606, ASME B16.42 Class 150)
- Configuration: Grooved x Grooved, Less Gate Valves
- Relief Valve Discharge Port (8"-10" models): 3.69 sq. in.
Materials
- Main Valve Body: Ductile Iron ASTM A536
- Access Covers: Ductile Iron ASTM A536
- Coating: NSF Approved Fusion Epoxy Finish
- Internals: Stainless Steel, 300 Series; NORYL™
- Fasteners & Springs: Stainless Steel, 300 Series
- Elastomers: EPDM (FDA approved); Buna Nitrile (FDA approved)
- Polymers: NORYL™
- Sensing Line: Stainless Steel, Braided Hose
- Stem: Stainless Steel ASTM A 276
- Seat Disc Elastomers: EPDM
Dimensions (Approximate, 8-inch, Less Gate Valves)
- Overall Length (A): 62 inches (1575 mm)
- Length Less Gate Valves (B): 55 inches (1397 mm)
- Width (C): 38 1/2 inches (978 mm)
- Height (D): 8 31/32 inches (228 mm)
- Weight Without Gates: 321 lbs (146 kg)
Certificates & Approvals
- ASSE® Listed 1047 (2 1/2" - 8")
- CSA B64.4 (2-1/2" - 8")
- AWWA Compliant C550
- UL® Classified
- C-UL® Classified
- FM® Approved
- Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California
- NYC MEA 104-05-M
- Meets NSF/ANSI/CAN 61 requirements (0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)